brovo cable adjustment tool
#1
Registered
Thread Starter
Join Date: Jan 2001
Location: elyria ohio usa
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
brovo cable adjustment tool
Does any one have a diagram of how to use tool 91-17262, if so please send to__ [email protected] Thanks Ken
#9
Ginger or Mary Ann?
Charter Member
Re: brovo cable adjustment tool
Aw heck, just slowly move the adjustment cable in the slot in short increments until it works equaly in both gears.
When I reversed my props from in to out and swapped the shifter throws around, I still had to fiddle with the adjustment as the one drive would not fully engage in 1 direction after the swap. The adjustment was not changed prior either and is independent of the shifter to shifter bracket thinga magig. The adj. tool did not work in my case. I moved the adjustment from 1 extreme to the other in both gears, then tightened at the mid point.
When I reversed my props from in to out and swapped the shifter throws around, I still had to fiddle with the adjustment as the one drive would not fully engage in 1 direction after the swap. The adjustment was not changed prior either and is independent of the shifter to shifter bracket thinga magig. The adj. tool did not work in my case. I moved the adjustment from 1 extreme to the other in both gears, then tightened at the mid point.