Tailpipe fabrication
#1
Registered
Thread Starter
Join Date: Sep 2003
Location: Toledo, Ohio/Las Vegas, NV
Posts: 3,029
Likes: 0
Received 1 Like
on
1 Post
![Default](/forums/images/icons/icon1.gif)
My fabrication shop has unfortuantely closed and I'm looking for someone to modify the ends of my tialpipes. Just need the 4" cone-down section at the end removed and replaced with similar length 4 1/2" section to accommodate 4 1/2 " clamp-on mufflers. This is in the single-walled section outside the transom after the water dump. Anyone know a shop that can do this?
Last edited by RedDog382; 12-29-2005 at 10:42 AM.
#4
Registered
![Default](/forums/images/icons/icon1.gif)
Originally Posted by RedDog382
My fabrication shop has unfortuantely closed and I'm looking for someone to modify the ends of my tialpipes. Just need the 4" cone-down section at the end removed and replaced with similar length 4 1/2" section to accommodate 4 1/2 " clamp-on mufflers. This is in the single-walled section outside the transom after the water dump. Anyone know a shop that can do this?
#5
No Comment
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Join Date: Jan 2002
Location: This post copyright, Packinair Inc. All rights reserved.
Posts: 1,622
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
drpo them off, I have one of those new cold heat sodering guns I am dying to try out
![Drink](/forums/images/smilies/drink.gif)
__________________
![](http://stupidfastboats.com/forumsig.gif)
#6
Registered
Thread Starter
Join Date: Sep 2003
Location: Toledo, Ohio/Las Vegas, NV
Posts: 3,029
Likes: 0
Received 1 Like
on
1 Post
![Default](/forums/images/icons/icon1.gif)
Originally Posted by TRICK
Since it's a CMI product, why not use them?
Call Randy at CMI 920 722 7084
Call Randy at CMI 920 722 7084
Just e-mailed photos to Randy today, waiting for a response. Point he made on the phone was the tailpipes were modified by someone else in the recent past ... they may not want to deal with "someone else's" stuff. Actually, I gave him your name as a customer character reference.
![Big Grin](/forums/images/smilies/biggrin.gif)
By the way, I recieved the Lifeline vests tonight. I'm very satisfied with them. Also recieved the 4 1/2" GGB's I traded out with Lofty. Thanks for your help!
#8
Ginger or Mary Ann?
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Nothing special there. Cut off the add on just before the weld, Tig on a new peice. Any body with a Tig welder can do that.
Is the 4 1/2" not longer enough for the mufflers?
What are the 2 drains for?
Is the 4 1/2" not longer enough for the mufflers?
What are the 2 drains for?
Last edited by US1 Fountain; 12-29-2005 at 07:13 PM.
#9
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Red Dog, where did you get the white rubber gasket for the outside of the tailpipe. I need to replace mine but have always used a thicker black rubber?
#10
Registered
Thread Starter
Join Date: Sep 2003
Location: Toledo, Ohio/Las Vegas, NV
Posts: 3,029
Likes: 0
Received 1 Like
on
1 Post
![Default](/forums/images/icons/icon1.gif)
Originally Posted by US1 Fountain
Nothing special there. Cut off the add on just before the weld, Tig on a new peice. Any body with a Tig welder can do that.
Is the 4 1/2" not longer enough for the mufflers?
What are the 2 drains for?
Is the 4 1/2" not longer enough for the mufflers?
What are the 2 drains for?
The two drains were water dumps from previous rigging (previous owner) of Stellings dry exhaust and 950 h.p. blower motors.