Anyone know these motors?
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Found these motors on e-bay, ad claims they came with a 28 cig. From the bills that came with the motors it seems the work was done around Benton Harbour Michigan. Does anyone know the story on these motors, as I'm looking for a set like this presently but would rather not bother with motors that will grenade.
http://cgi.ebay.com/ebaymotors/ws/eB...e=STRK:MEWA:IT
Thanks for any insight.
http://cgi.ebay.com/ebaymotors/ws/eB...e=STRK:MEWA:IT
Thanks for any insight.
#2
Registered
Join Date: Jan 2005
Location: Paducah, KY
Posts: 4,601
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I would be leary, for a few hundred bucks you can buy a take out motor from a local marina and have it built ofr about $3000, then you know what you have.
I am always EXTREMLY concerned about motors that have been freshly built unless I know personally the reputation of the builder, get his story on it, and trust them extremly well.
Remember the cost of a motor is only a portion of the cost of changing a motor.
I am sure you know that, but it can't hurt to say it again...
I am always EXTREMLY concerned about motors that have been freshly built unless I know personally the reputation of the builder, get his story on it, and trust them extremly well.
Remember the cost of a motor is only a portion of the cost of changing a motor.
I am sure you know that, but it can't hurt to say it again...
#5
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Dean -- I agree and won't even consider them unless I get a positive feedback from someone who personnally knew them going together. I have been looking for a set of takeouts , unfortunately most are high hours and salt water use. As far as knowing what it takes to exchange motors --- I'm well aware -- My personnal best time for removing 2 big blocks is 2 hours 45 minutes by myself. A little longer going back in
What I have know is a set of 420's, and a set of 700's both of which are going to be put into other applications.
betitbig -- if you know something about these exact motors please pm me -- if not, thanks for you opinion.
![Roll Eyes (Sarcastic)](/forums/images/smilies/rolleyes.gif)
What I have know is a set of 420's, and a set of 700's both of which are going to be put into other applications.
betitbig -- if you know something about these exact motors please pm me -- if not, thanks for you opinion.
#6
Registered
Join Date: Jan 2005
Location: Paducah, KY
Posts: 4,601
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Originally Posted by delsol
Dean -- I agree and won't even consider them unless I get a positive feedback from someone who personnally knew them going together. I have been looking for a set of takeouts , unfortunately most are high hours and salt water use. As far as knowing what it takes to exchange motors --- I'm well aware -- My personnal best time for removing 2 big blocks is 2 hours 45 minutes by myself. A little longer going back in
What I have know is a set of 420's, and a set of 700's both of which are going to be put into other applications.
betitbig -- if you know something about these exact motors please pm me -- if not, thanks for you opinion.
![Roll Eyes (Sarcastic)](/forums/images/smilies/rolleyes.gif)
What I have know is a set of 420's, and a set of 700's both of which are going to be put into other applications.
betitbig -- if you know something about these exact motors please pm me -- if not, thanks for you opinion.
I have not a clue on these in particular, but as a general discussion note, Jasper just quited a HELL of a price on a pair of marine 454 mag motors, $3800 for a long block. That will be hard to beat, I am sure I could not get a pair built for that.
#7
Registered
![Default](/forums/images/icons/icon1.gif)
Originally Posted by dean51267
I have not a clue on these in particular, but as a general discussion note, Jasper just quited a HELL of a price on a pair of marine 454 mag motors, $3800 for a long block. That will be hard to beat, I am sure I could not get a pair built for that.
#8
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
go time -- are you talking about the 'Jasper motors'? I don't know who they are or where they're from, but if you had a bad experience PM me thanks.
#10
Registered
![Default](/forums/images/icons/icon1.gif)
Originally Posted by birdog
Stay clear of the Jasper junk....A buddy is still living the nightmare
.. I have Jasper Remans and have had no trouble .... well ...one did break a valve at about 75 hours ..they fixed it ...broke again in 2 hours ...they sent me new motor ....but I had to foot the labor until they inspected the motor ....and then said the motors were over Rev'd .. which I know weren't ... the other motor runs great ...well it does burn about 1 quart/hr ... runs great though ... you know what ...never mind .........
![Roll Eyes (Sarcastic)](/forums/images/smilies/rolleyes.gif)
One note ... the motor they replaced was out of warranty ... they didnt have to replace it ...but they did ...
Last edited by offthefront; 02-08-2006 at 01:59 PM.