Teague, Sterling, KE, Custom Engine Mechanics?
#21
Platinum Member
Platinum Member
Re: Teague, Sterling, KE, Custom Engine Mechanics?
I tried that as well as Pat at Active Thunder in 03 on my 37 A.T. Radio Active. The boat stayed at the factory for over 3 1/2 mos. All I got was the run around, for a year. Very disappointing, soured me on the whole KE experience. Not enough R&D especially on the 675's, and it's unfortunate to make the customers their test bed. I ended up having some one else half azz fix the problems, all at a cost to me. Big let down, I should have stayed with the factory 500 efi's at the time. Jeff Jassby
#22
Platinum Member
Platinum Member
Re: Teague, Sterling, KE, Custom Engine Mechanics?
When I went to retrieve my parts and or fictisious motors TMP built for me. Steven Emmons told me he sold all the Whipple chargers to some shop on the west coast. Then he told me that David Richard and him were on the out's and please keep him out of the law suit. Well I met with both of them, taped them, and I'm truely looking forward going to court. Eddie was the only reason I bought from them, always truthful, glad he is on his own. Jeff Jassby
Last edited by Jassman; 01-27-2007 at 02:39 PM.
#23
Registered
Re: Teague, Sterling, KE, Custom Engine Mechanics?
They are doing a great job building some new "state of the art engines". They just built a set of motors for my buddy Joe and they are putting out 1300 on pump gas. Can't wait to see his speed! If they perform as we think they will, I'm ordering a set.
#24
Re: Teague, Sterling, KE, Custom Engine Mechanics?
I called KEPP, not knowing it wasn't the real deal. So it was KEPP that wasn't very helpful. As I understand it this motor was ordered through the real KE in the fall of 2004 and KE himself spec'd the motor and had Sterling do the assembly due to his financial situation. Regardless, the motor is long out of warranty and my original question still stands- What do you do 2 years down the road if you run into an issue? find the hottest mechanic local to you? or do you call the original builder for help? What could they do hundreds of miles away anyway?
That means you talked to Kepp AKA CP perf,hardin marine .
They should of atleast refered you to the real Keith,thats pretty shetty of them
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#25
Registered
Join Date: Aug 2004
Location: AZ
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Re: Teague, Sterling, KE, Custom Engine Mechanics?
Andy
#26
Charter Member #40
Charter Member
Re: Teague, Sterling, KE, Custom Engine Mechanics?
Lubejobs, Joe's engines were a work of art. Agruably the nicest looking engines out there. KE productions are truly in a category of their own and continually set the bench mark for other manufacturers.
#27
Gold Member
Gold Member
Re: Teague, Sterling, KE, Custom Engine Mechanics?
If you cant find anyone local to help you out with maintnance or general work, feel free to give us a call. We maintaine a fleet of Sterling, Cobra, Teague, Mercury Racing, Eddie Young. etc... boats here on the Chesapeake Bay.
John S.
John S.
#29
Registered
Re: Teague, Sterling, KE, Custom Engine Mechanics?
Dean Gellner Engineering He takes great pride in his engines.. They are build with great care & are bullet proof.
216-398-8500
Jeff
216-398-8500
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
Buddy OO
General Boating Discussion
2
03-09-2007 05:30 PM