JCPERF

Tyler is the best in the business.He told me himself And he has Davey Crockett putting engines together for him.

JBoat

wow thanks for all the feed back you guys are making me feel allot better about this potential purchase. Sound like I shouldnt have too much to worry about. Now if I can find a buyer for my boat all be all set.

Brad

Tyler has several customers in SC and a great reputation. Very nice guy!

Escape Velocity

Tyler's upgraded/built three engines for me and all are still running flawlessly. He builds for reliability and torque - exactly what you need in a boat. When I visited his shop he showed me a set of 496 heads that he upgraded by reshaping the combustion chamber, porting, etc. and they looked great. He was on the ground floor with GM on the 496 development.

Randy

AvidBoater

I have approximately 400 hours on blower motors with no problems to date. I recently had compression tests conducted and they still are strong. I do change the oil regularly and don't abuse the engines. Tyler is a stand up guy and I would recommend him to anyone. He will always do my serious engine work.

AIR TIME

tyler is one of the top engine builders here right next to jc

articfriends

Tyler tuned my blown 540 on the dyno,he was one of the first guys to be able to rtune mefi3's and has done develipmental work for gm. You could eat off the floor of his engine assembly room. If I didn't know how to build my own motors he is one of the few guys I would trust to do it,Smitty

RJBBC

Tyler installed the upgrade kit you linked on your original post to our 454MAG this year. The boat, 2000 Checkmate 259 Convincor, went from 65mph to 72mph @ WOT with the kit and a different prop. Could not be happier with his work.

ViciousOne

Tyler is a stand up guy, Dont worry about the motor just take a hard look at the rest of the boat!!!





Spark

Revd Up

Tyler put together a 570 HP engiine for me and it also has been bullet proof.