Tyler Crockett Marine
#31
Registered User
Platinum Member
Join Date: Oct 2005
Location: Columbus, OH
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tyler Crockett Marine
Tyler tunned some motors for us one of them was a 540 with a M-4 Procharger it made 1100HP and 1200 torque. It runs great and it still running to this day and that was 3 or 4 years ago.
Bill Kingery
Bill Kingery
#32
Registered
Platinum Member
Join Date: Nov 2000
Location: Lake Lanier - N. Georgia
Posts: 6,307
Likes: 0
Received 1 Like
on
1 Post
Re: Tyler Crockett Marine
Nice to hear so many positive things about our ORL engine re-sealer and dyno guy. I'm looking forward to working w/ Tyler.
www.OffshoreRacingLeague.com
www.OffshoreRacingLeague.com
#33
Registered
Join Date: Jan 2005
Location: Tappahannock, VA
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tyler Crockett Marine
Tyler is a great guy, as you have seen. He did the "turn key" motor for the 29 Fountain that I rigged. We had a few issues, mostly related to "bolt on" components, and Tyler made sure that all problems were resolved. He also flew to Virginia, to "tune" the engine in the boat. That made an enormous difference in the economy and operation of the engine. In addition he made some extra efforts to help Boost some additional performance for a local radar shoot. Great guy.
#34
AKA NoMoBoatin
Platinum Member
Join Date: Jan 2003
Location: Can't remember.
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tyler Crockett Marine
Originally Posted by rackster
Tyler is a great guy, as you have seen. He did the "turn key" motor for the 29 Fountain that I rigged. We had a few issues, mostly related to "bolt on" components, and Tyler made sure that all problems were resolved. He also flew to Virginia, to "tune" the engine in the boat. That made an enormous difference in the economy and operation of the engine. In addition he made some extra efforts to help Boost some additional performance for a local radar shoot. Great guy.
#35
Registered
Re: Tyler Crockett Marine
I owe Tyler a BIG thank you from an incident a few years ago... we were at the ramp at a poker run in the thousand Islands. We had a big Skater with Mercs and a cross threaded spark plug hole. Tyler was on a day off relaxing when he came by. After seing our situation he crawled in the bilge cleaned out the thread with a tap and saved the day.
Note; not his motor and on holidays he got dirty for some guys he never met before.
I can only imagine how far he would go for a real customer.
If I wasn't clear that day Tyler, "Thank you".
Mark
Note; not his motor and on holidays he got dirty for some guys he never met before.
I can only imagine how far he would go for a real customer.
If I wasn't clear that day Tyler, "Thank you".
Mark
#36
OSO Content Provider
Commercial Member
Re: Tyler Crockett Marine
If you want to read more about what Tyler has to say, pick up HOT MAGAZINE. He is a Technical Columnist for the mag.
Yes Masher he has.
He had a killer motor in Destin for Dukes to run up against, but unfortunately his boat's bottom couldn't withstand the torture any longer....
That would have been a tight race with him and the Dukes.
Originally Posted by masher44
Does he build motors for Papa Dukes?
He had a killer motor in Destin for Dukes to run up against, but unfortunately his boat's bottom couldn't withstand the torture any longer....
That would have been a tight race with him and the Dukes.