Trailer fender needed
#11
![Default](/forums/images/icons/icon1.gif)
Did you try these guys. Being Saber is made near GR they may have worked with them in the past. I have an Integrity trailer and they referred me to them when I needed a part.
Richfield Trailer Supply
7245 Division Ave S
Grand Rapids, MI 49548
(616) 281-3220
Richfield Trailer Supply
7245 Division Ave S
Grand Rapids, MI 49548
(616) 281-3220
#12
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Thanks guys I will give these guys a shout.
Cuda This may sound silly but we just aren't that crazy about the looks of the diamondplate fenders. But if that is all we can get it's not that big of a deal & that is what we will go with. Thanks again to all.
Cuda This may sound silly but we just aren't that crazy about the looks of the diamondplate fenders. But if that is all we can get it's not that big of a deal & that is what we will go with. Thanks again to all.
#13
Charter Member #232
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
I also am not a big fan of the diamond plate fenders. They are better to stand on but they also get dirtier.....
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#14
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
We have one on the way !!!!
Although I have several emails & phone calls out, The only place we could find one is through Amera Trail in St. Cloud FL.
Thanks everyone for all the help.
![Big Grin](/forums/images/smilies/biggrin.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
Although I have several emails & phone calls out, The only place we could find one is through Amera Trail in St. Cloud FL.
Thanks everyone for all the help.
Thread
Thread Starter
Forum
Replies
Last Post
DJD
General Boating Discussion
6
06-10-2004 12:31 PM