flush deck hatches
03-07-2007, 07:39 PM
#1
Registered
Thread Starter
Join Date: Dec 2003
Location: St.Thomas USVI
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
flush deck hatches
Im in the process of modernizing my scarab. I want to remove my raised deck hatches and replace them with recesses or flush deck hatches. Has anyone outhere done this conversion or have any resources to offer for this project. I will post pics as we work.
Pics from you guys would help
Pics from you guys would help
03-07-2007, 08:04 PM
#2
Neno the mind boggler
VIP Member
i have the same boat as you and was wondering the same thing myself. Those factory Bobars are pretty thick. plus the rear hatch you can throw a cow through 
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
03-07-2007, 09:05 PM
#3
Ginger or Mary Ann?
Charter Member
Fountain recess their hatches flush. They use acrylic formed to match the deck profile. Look close in front of the W/S. (click twice)
Last edited by US1 Fountain; 12-02-2011 at 11:14 AM.
03-08-2007, 08:20 AM
#4
Registered
Thread Starter
Join Date: Dec 2003
Location: St.Thomas USVI
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
acrylic seems to be the easiest thing rather than forming it out of fiberglass. Question is where can I buy acrylic, that is about 1/2 to 5/8 thick in white.
Thread
Thread Starter
Forum
Replies
Last Post
Pure Energy
General Boating Discussion
1
02-19-2005 05:40 PM
