sealing bolts
#1
Registered
Thread Starter
sealing bolts
I am replacing my exhaust tips and I wanted to thru bolt them instead of using wood screws.I already have the holes there
because the boat came with corsa muffler tips that have welded studs on them.whats the correct way to seal the holes if I use long bolts and thrue bolt them?
because the boat came with corsa muffler tips that have welded studs on them.whats the correct way to seal the holes if I use long bolts and thrue bolt them?
#3
Geronimo36
Gold Member
Last edited by Panther; 03-26-2007 at 02:04 PM.
#4
Registered
3M 4200 would work as well.