My Hustler Windscreen Broke
#31
Platinum Member
Platinum Member
Strip, he was unable to make a new windscreen for ya.
#35
Rob
VIP Member
Thread Starter
I called them they didnt have a mold for the Hustler. He would have to get to see if he could make it.
I just shipped it off to Carlos with AcryliCo ,he said he can make one from my old,make it axactly like my old one.He said he would make a mold from it and have it ready around the 27th. Thats pretty fast.
Thanks guys,Rob
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#36
Rob
VIP Member
Thread Starter
and rear engine hatch, back seat,over engine when shes polishing the blowers,trailer fenders,
Actually it was prob a drunk buddy pulling on it climbing over it getting to the deck
Actually it was prob a drunk buddy pulling on it climbing over it getting to the deck
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#37
Rob
VIP Member
Thread Starter
This is the hole that the riv nut pulled out , the riv nut wasn't even spread out, the plastic inserts feel like there a plastic not rubber.
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#38
Registered
Join Date: Dec 2005
Location: Middletown, Ct. 06457
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
those things dont look to have much flex appeal. seems as though something should give a little. There must be a lot of pressure on that thing at speed. Mabe you should try well nuts to remount the new one. can you up grade to lexan it was originally designed for NASA?
#39
Rob
VIP Member
Thread Starter
Originally Posted by [email protected]
those things dont look to have much flex appeal. seems as though something should give a little. There must be a lot of pressure on that thing at speed. Mabe you should try well nuts to remount the new one. can you up grade to lexan it was originally designed for NASA?
They say it worth about 1 mph ,so I bet it does have some presure on it.Lexan they say was 3 times the price and doesent hold up as good in the sun?
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#40
VIP Member
VIP Member
Join Date: Mar 2005
Location: Lantana, FL
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Lexan
Lexan (polycarbonate) is more impact resistant than acrylic. However, it scratches easier and is hydroscopic (absorbs humidity from the air and goes yellow like 80's car headlights) To make up for this it has to be hardcoated which is the application of a very hard film on the part. We do hardcoating and it ain't easy, that's why it gets kind of pricey.
Although polycarbonate is used in high speed canopy boats for safety, the optics are not that good due to the sheet being extruded, the tint selection is pretty restricted as is the thickness.
Guess there is an application for everything!
Although polycarbonate is used in high speed canopy boats for safety, the optics are not that good due to the sheet being extruded, the tint selection is pretty restricted as is the thickness.
Guess there is an application for everything!