Predator Powerboats Does It Again...
#141
Registered
.
the final tooling gel applied and begin buffing
the final tooling gel applied and begin buffing
#142
Registered
.
again this is a plug, once the mold is finished, this plug will be destroyed
btw, just got word that Arnaldo is moving more into the lighter composite materials for strength and weight savings
again this is a plug, once the mold is finished, this plug will be destroyed
btw, just got word that Arnaldo is moving more into the lighter composite materials for strength and weight savings
#144
Registered
.
in the previous builds, the receivers were glassed-in each time, then the dash was glassed-in an order for a windshield was made
this time, its all part of 1 pull from the mold
no difference, except the build is faster
the previous way may have added a couple of pounds due to the body work, but nothing too substantial
the dash, [which is not visible] is also bigger now to accommodate the larger screens
.
in the previous builds, the receivers were glassed-in each time, then the dash was glassed-in an order for a windshield was made
this time, its all part of 1 pull from the mold
no difference, except the build is faster
the previous way may have added a couple of pounds due to the body work, but nothing too substantial
the dash, [which is not visible] is also bigger now to accommodate the larger screens
.
Last edited by noli; 06-04-2019 at 08:19 PM.
#145
Registered
.
here's a pic I found on the internet from a major cat manufacturer
the dash is glassed in, and so is the receiver
.
here's a pic I found on the internet from a major cat manufacturer
the dash is glassed in, and so is the receiver
.
#147
Registered
.
I'll try to find out who Arnaldo uses
.
I'll try to find out who Arnaldo uses
.
#148
Registered
..
beginning to buff the surface of plug and remove imperfections
the hull below the deck tooling is the C306 widebody 400Rs hull #2
.
beginning to buff the surface of plug and remove imperfections
the hull below the deck tooling is the C306 widebody 400Rs hull #2
.
Last edited by noli; 06-05-2019 at 04:55 AM.
#150
Registered
,
yes, this is what you get with the I/O model
* extra stringers
* relocation of fuel tanks
* beefier transom
* taller hull
* 2 xtra-large engine hatches
* optional cabin up front
* top-mounted engine scoops or side mounted scoops
* optional bustle w/ swim steps
*
please call Arnaldo
.
yes, this is what you get with the I/O model
* extra stringers
* relocation of fuel tanks
* beefier transom
* taller hull
* 2 xtra-large engine hatches
* optional cabin up front
* top-mounted engine scoops or side mounted scoops
* optional bustle w/ swim steps
*
please call Arnaldo
.