Bravo XR ok to use with Bravo 3 transom assembly?
#1
Registered
Thread Starter
Join Date: Jul 2006
Location: Seattle, WA
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Thinking of upgrading Bravo 3 setup on my cobalt to Bravo XR drive. Can I use the same transom assembly? What else is involved or is it just a simple drive/prop swap?
#2
Charter Member #1171
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Yep,,transom assy are the same,it will bolt right up
__________________
I want to live in a world where a chicken can cross the road and not have its motives questioned.
I want to live in a world where a chicken can cross the road and not have its motives questioned.
#6
Charter Member #1171
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Good point !!!!!!!!!! forgot about the bearing,,,,,,,, I was refering to bolting up and the rams etc,
__________________
I want to live in a world where a chicken can cross the road and not have its motives questioned.
I want to live in a world where a chicken can cross the road and not have its motives questioned.
Last edited by obnoxus; 05-28-2007 at 09:09 AM.