TRS transmission
#11
Banned
Join Date: Sep 2001
Location: Deland, Florida
Posts: 25,191
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=Edward R. Cozzi;2157135]
It is a single gear Ford C-6. I had one rebuilt, the input shaft clearanced, and an extra cluth plate installed. As I recall, it was about $1350 to have it done. The BW transmission will require the engine to be moved forward.
Here are some parts out of the Merc transmission they took out when mine was rebuilt. Does it look like it needed it?
Btw, Merc didn't discontinue the Trs drive because it was a bad drive, they did it because Bravo's cost less to produce.
Here are some parts out of the Merc transmission they took out when mine was rebuilt. Does it look like it needed it?
Btw, Merc didn't discontinue the Trs drive because it was a bad drive, they did it because Bravo's cost less to produce.
#12
Registered
VIP Member
Thanks, Cuda. You confirmed everything I've been saying.
The original post asked asked about a 'MercTrans". NEVER ASKED ANYTHING ABOUT THE BW TRANS USED WITH THE LATER TRS.
The original post asked asked about a 'MercTrans". NEVER ASKED ANYTHING ABOUT THE BW TRANS USED WITH THE LATER TRS.
#13
Registered
VIP Member
How are you doing? Have you fully recovered from that accident?
#14
VIP Member
VIP Member
i have a merc tran that was rebuilt about 5 years ago , should have a going through. selling my 28 cig and don't need it any more. sent me a private message with phone# if interested
Thread
Thread Starter
Forum
Replies
Last Post
overdrive75
Drives and Lower Units
2
08-08-2007 04:41 PM