Who Has Or Sell Sea Strainer Cap With Reg Hose Fitting?
07-01-2007, 10:54 PM
#1
Registered
Thread Starter
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,822
Received 410 Likes
on
276 Posts
Who Has Or Sell Sea Strainer Cap With Reg Hose Fitting?
Just want to simplify the task when I want to run engines on hoses... does it exist or I have to invent this by myself?
Tell me if you already have this!!!
Thanks.
Tell me if you already have this!!!
Thanks.
Platinum Member
07-02-2007, 08:27 AM
#4
Registered
Yes, great idea, I have gill strainers with plastic lid 1/2" thick.
Why not thread for a garden hose barb connection for engine flush.
I could use that forsure times two.
Why not thread for a garden hose barb connection for engine flush.
I could use that forsure times two.
06-12-2008, 07:54 PM
#5
Registered
Thread Starter
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,822
Received 410 Likes
on
276 Posts
bringing back this tread. still don't have a fresh water flush system for TRS, AND, Trick marine does not exist anymore, so... any suggestion where I can find those?
06-12-2008, 10:55 PM
#7
VIP Member
I would think it would be hard to drill and tap it with out it cracking, I replaced mine from over tighten and cracked,
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
06-12-2008, 11:01 PM
#8
On my Hustler it has a plastic/PVC T fitting on the inlet hose close to the transom. goes to a valve to select from port and star. I can take a pick if ya need one, should be cheap, you could even leave off the valve and just cap the end and hook a water hose when ya want to flush.
post 104 http://www.offshoreonly.com/forums/s...t=92301&page=3
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
06-12-2008, 11:53 PM
#9
Not to try & sidetrack the thread but what did you have to pay for the new lid ? & what brand strainer was it ? I have a M.M. on the way that will be needing a new lid... I was told that it is the same as the Gil but not sure... I have emailed a couple people trying to get a price including M.M. & no luck yet getting a response. Thanks , Scott
06-13-2008, 12:12 AM
#10
Not to try & sidetrack the thread but what did you have to pay for the new lid ? & what brand strainer was it ? I have a M.M. on the way that will be needing a new lid... I was told that it is the same as the Gil but not sure... I have emailed a couple people trying to get a price including M.M. & no luck yet getting a response. Thanks , Scott
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
