Is this average hours for a 1990 boat
#11
VIP Member
VIP Member
Around 625 on my 2000 29 outlaw. Oil every 25 hrs and drive oil 5o hrs. It is all in the maint. The bad part is that I have only used it Twice this year since we got the 43. It is a 87 and it only has 425 hours on crusaders.
#12
Registered
I put about 15-30hrs a year on my go-fast
I put 100hrs a year on my sea ray.
I put 100hrs a year on my sea ray.
#13
Platinum Member
Platinum Member
Thread Starter
#15
Registered
425 hours is loooooow. And considering the motor doesn't have an ECM, there is no way to know for sure how many hours are actually on the motor. Go to Sunsation's site post some questions about the boat. Joe at the factory may have information as to the original owner and the boat's history.
#17
Registered
Join Date: Aug 2007
Location: Royal Oak, MI
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
!!! I think this is the boat that I bought. White 90' Rocket with red and black in St. Clair Shores? 425 is what he said... it actually had 428 on it.
The boat has been great so far. I jumped a freighter wake/wave and broke some wood in the driver's seat (I'm a big guy just under 300lbs). That, and the center windsheild support is cracked (I knew about it when I bought the boat). So far, she runs nice and smooth.
I just got the seat rebuilt with better brackets and wood and got it reinstalled yesterday! Had the seam on the back seat fixed as well. Can't wait to go back out. I noticed that the passenger seat is a little loose on the right side of it, but the bolts seem to be stripped in the floor. Need to figure out how to fix that...
If anyone wants to meet up, I'm anxious to meet some people to hang out with on the lake. I'll be out there this Wed. and probably all weekend.
Later,
-=Mike G.
The boat has been great so far. I jumped a freighter wake/wave and broke some wood in the driver's seat (I'm a big guy just under 300lbs). That, and the center windsheild support is cracked (I knew about it when I bought the boat). So far, she runs nice and smooth.
I just got the seat rebuilt with better brackets and wood and got it reinstalled yesterday! Had the seam on the back seat fixed as well. Can't wait to go back out. I noticed that the passenger seat is a little loose on the right side of it, but the bolts seem to be stripped in the floor. Need to figure out how to fix that...
If anyone wants to meet up, I'm anxious to meet some people to hang out with on the lake. I'll be out there this Wed. and probably all weekend.
Later,
-=Mike G.
#18
Platinum Member
Platinum Member
Thread Starter
Congratulations Mike. I am glad the boat was in as good shape as the guy told me. If I did not have my own Boat/ Project, I would have bought that one. May I ask what you paid for it?
Patrick
Patrick
Thread
Thread Starter
Forum
Replies
Last Post
CAP071
General Boating Discussion
2
04-24-2006 07:05 AM