Show me your lift bunks
#1
Enjoy the show
VIP Member
Thread Starter
Join Date: Feb 2001
Location: The Joisey Shore
Posts: 10,353
Likes: 0
Received 0 Likes
on
0 Posts
Show me your lift bunks
My next door neighbor brought home his new toy today, a gorgeous 2006 Top Gun Unlimited. He has a new 16,000 lb lift and we we setting up the bunks today.
Look at this crappy system they sent. It doesn't fit right at all so I took some pics to send to the manufacturer.
How does your look?
I think he's going to end up spending the money for a Myco cradle.
Thoughts?
Look at this crappy system they sent. It doesn't fit right at all so I took some pics to send to the manufacturer.
How does your look?
I think he's going to end up spending the money for a Myco cradle.
Thoughts?
#4
Registered
Join Date: Oct 2006
Location: Chain O Lakes
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Thats clearly not set up correctly. I would take the boat off of it right now. He doesn't want something to fail and mess up the boat. The boat isn't centered on the bunks and that causes more weight to one side so the lift isn't balanced correct, and it shouldn't be resting on the strakes either.
Last edited by SpeedyWho; 07-15-2007 at 12:09 PM.
#6
If I had a Top Gun Unlimited it would be sitting on a MYCO Lift Cradle
http://www.mycotrailers.com/liftcrad...7-564D04FE3C85
http://www.mycotrailers.com/liftcrad...7-564D04FE3C85
#7
Platinum Member
Platinum Member
#8
The boat is too far back on the lift, get the cg of the boat and put in on the CG of the lift, for and aft, side to sidn't isn't a big deal. Second, get both bunks under the lifting strakes, best place to lift a boat is under the strakes. This came from Cig themselves when I was in the biz. Also looks like the geometry of the bunks is not right to fit the bottom of the boat.
#9
Registered
You are gonna develop the Hook of all hooks without that beauty being supported at the back. My apache is a straight V and the long bunks come just beyond the back of the transom. My neighbor has Fountain/stepped that is set up correct, I can take a pic next weekend.
#10
BRAD SCHOENWALD
Platinum Member
If I had a Top Gun Unlimited it would be sitting on a MYCO Lift Cradle
http://www.mycotrailers.com/liftcrad...7-564D04FE3C85
http://www.mycotrailers.com/liftcrad...7-564D04FE3C85
Order it, install it, and enjoy the benefit of it.