check these clamps out!
#1
Registered
Thread Starter
check these clamps out!
i found these searching around looking for a alternative to using plastic ties to clamp stainless lines..
i found some in aluminum , but who knows how long that would last..
these are made by "made for you products" out of Dupont nylon...
come in all different sizes and colors...
a set of -12AN was only $10.63
got them from www.centuryperformance.com..
thought i would pass this along.......
i found some in aluminum , but who knows how long that would last..
these are made by "made for you products" out of Dupont nylon...
come in all different sizes and colors...
a set of -12AN was only $10.63
got them from www.centuryperformance.com..
thought i would pass this along.......
#10
Registered
Thread Starter
they have a stainless bolt and a "nut inset " that holds the nut in place.
the bolt has a good half inch left when tightened...
www.made4uproducts.com
the ones pictured are the double place t clamp.
the bolt has a good half inch left when tightened...
www.made4uproducts.com
the ones pictured are the double place t clamp.