Borg Warner velvet transmission 72C 1.1 ratio
#1
Registered
Thread Starter
Join Date: Nov 2003
Location: Lanoka Harbor, NJ
Posts: 3,354
Likes: 0
Received 0 Likes
on
0 Posts
Borg Warner velvet transmission 72C 1.1 ratio
Toasted forward clutches ... I need one, anyone have 1 (or 2 seriously )??? ... NJ area would be a beautiful thing
Otherwise my season is done and with a broken wrist in early June it had really just begun
Chris 732-300-5222
Otherwise my season is done and with a broken wrist in early June it had really just begun
Chris 732-300-5222
#2
Geronimo36
Gold Member
Or get a rebuild kit, they're fairly easy to rebuild...
#3
Registered
Thread Starter
Join Date: Nov 2003
Location: Lanoka Harbor, NJ
Posts: 3,354
Likes: 0
Received 0 Likes
on
0 Posts
I missed 2 on eBay for yest. bid ended $382ea used, of course, but gauranteed no DOA. I was at work and thought they were mine for $377 ... wishful thinking. In MD coulda drove down to pick up too!!
#5
Registered
Thread Starter
Join Date: Nov 2003
Location: Lanoka Harbor, NJ
Posts: 3,354
Likes: 0
Received 0 Likes
on
0 Posts
#8
Registered
Platinum Member
Did the upgrade on both of mine beginning of the season. Went with the 10 plate grafitic upgrade. HUBER's Apprentice did them for me at Texoma Marine. He was recomended by Earl Huber when he was going to Chemo.
They are great. No whines, screams, in and out of gear strong. I have laid into them really hard with 625 hp engines and had no problems. They are supposed to be rated for 8-900 hp.
They are great. No whines, screams, in and out of gear strong. I have laid into them really hard with 625 hp engines and had no problems. They are supposed to be rated for 8-900 hp.
#9
Geronimo36
Gold Member
#10
Registered
Thread Starter
Join Date: Nov 2003
Location: Lanoka Harbor, NJ
Posts: 3,354
Likes: 0
Received 0 Likes
on
0 Posts