Propshaft dyno in Michigan?
#5
Registered
Join Date: Oct 2000
Location: Spicewood, Texas USA
Posts: 1,382
Likes: 0
Received 3 Likes
on
2 Posts
I have one in Texas. I can dyno up to 800 prop shaft HP. There are very few quality prop shaft dynos around. Most are just for putting a load on the drive for trouble shooting and don't have data acquisition capabilities.
#6
Registered
Try Baker Engineering. I didn't see one when I was up there in June but then again I didn't ask if they had one.
#7
Registered
Thread Starter
I am starting to realize that they are few and far between. Unfortunately you are a LONG way from me!
Last edited by onesickpantera; 08-21-2007 at 02:59 PM.
#8
Registered
Thread Starter
#9
Registered
#10
Registered
Join Date: Oct 2000
Location: Spicewood, Texas USA
Posts: 1,382
Likes: 0
Received 3 Likes
on
2 Posts
Land & Sea. I've got the dual rotor absorber with Dynomax 2000 acquisition software.
http://www.land-and-sea.com/prop-sha...arine-dyno.htm
http://www.land-and-sea.com/prop-sha...arine-dyno.htm