Surface drive CC's?
#1
Registered
Thread Starter
Join Date: Nov 2005
Location: Millsboro, DE
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I was going to post this on Anglersonly.com but the forum is loaded up with porn spam.
Who here has a CC with a surface drive setup?
I'm primarily interested in how clean the wake is at a 6 knot trolling speed.
Who here has a CC with a surface drive setup?
I'm primarily interested in how clean the wake is at a 6 knot trolling speed.
#2
Registered
Thread Starter
Join Date: Nov 2005
Location: Millsboro, DE
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
#5
Forum Regulator
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
Might look into the Pulse Drive setup; but there are + and - to that setup.
#6
Registered
![Default](/forums/images/icons/icon1.gif)
I might suggest posting this in the Nor-Tech forum, or just go buy this boat...
http://www.yachtworld.com/core/listi...currencyid=100
http://www.yachtworld.com/core/listi...currencyid=100
#7
Registered
Thread Starter
Join Date: Nov 2005
Location: Millsboro, DE
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
#9
Registered
Thread Starter
Join Date: Nov 2005
Location: Millsboro, DE
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I'll check out nor tech forum, thanks.
Yes but no more than OB's - still a PIA.
One downside I see is the engines being in the boat at the transom so you'd have a large engine hatch to deal with or motor box on a single engine app.
So to add another question has anyone used jackshafts with surface or pulse drives?
Yes but no more than OB's - still a PIA.
One downside I see is the engines being in the boat at the transom so you'd have a large engine hatch to deal with or motor box on a single engine app.
So to add another question has anyone used jackshafts with surface or pulse drives?