baja27

I would assume that the post 95 hulls would be a tad slower due to having more free board thus being a little heaver.

Panther

When I worked at the marina a guy had a 33' PP with 600-650HP 540's... boat ran like 91-93mph if I remember correctly. Pretty sure it was a late 90's hull, maybe even 2000 or so...

Steve 1

The new hull mold was done in 94 the newer boats should run slightly faster with the refaired bottom!

PPlay33

The boat should run 88-91 depending on boat setup. I've seen 78-82 on 500hp boats just with prop changes.

MDGperformance

On your low deck hull 500 pushed them around 80,600 should get you around 86-88 depends on set up,actual hull weight and bottom condition,boat loves bay water and really well built.

SUNSATION 25

Already doing the motors eh Frank? Sorry I haven't called you back! between working lots of O/T and working on the boat and family my free time has been very limmited to say the least....

Dropped my engines off last weekend, hoping for 625-650HP can't wait to get her back together and on the water..............Jason

XPRESS 33PP

Good luck to you guys. Look forward to seeing your #'s when there done.
I'd like to try a couple of 7-10 Ilmors and some Konrads if $ was no object. I wonder how they would work in a 33?

SUNSATION 25

Thanks....

mr_velocity

502cu in Express Marine Engines just a tad over 600. Mike had the boat when I got the chip and that was in 1996. Not exactly sure the year but the motors were already getting tired when we did the Key West poker run in '98. Motors went in 99. Absolutely awesome riding boat and a blast with that power.

Man time flies.

open87

contact billy at gno http://www.gnocyclery.com/locators.html

he had a 33 with precision 750's /# 3's. it got the packages delivered...