Konrad/Speedmaster IIIA conversion
#42
Mindi
Thread Starter
Join Date: Jan 2005
Location: Hollywood, FL
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
#43
'05 Concept SF23
VIP Member
Looks very straight forward. Kurt, thanks for the info. I now have 3" of spacer, so I think another inch might help getting on plane. The 5 blade Maximus prop is a Bravo prop? Smaller diamater and more pitch? I will take a good hard look @ Miami Boat Show.
#44
Registered
Very nice! Looks to be as clean and simple as the other Konrad packages. From our experience I've found the Konrad kits to include everything and have explicit instructions for retro fit. This is no exception.
#45
Registered
[QUOTE=f311fr1;2369745]Looks very straight forward. Kurt, thanks for the info. I now have 3" of spacer, so I think another inch might help getting on plane. The 5 blade Maximus prop is a Bravo prop? Smaller diamater and more pitch? I will take a good hard look @ Miami Boat Show.]
Yes, the Maximus is for a Bravo shaft. The Konrad unit runs a 1.25" prop shaft with an XR style hub kit.
See you in Miami!
Kurt
Yes, the Maximus is for a Bravo shaft. The Konrad unit runs a 1.25" prop shaft with an XR style hub kit.
See you in Miami!
Kurt
#46
The Konrad/SSMIII conversion drive is 2" higher than the III
[email protected]
[email protected]
How does this affect performance?
Ed
#47
Registered
#48
Platinum Member
Platinum Member
Join Date: Mar 2004
Location: Hillsborough,NJ
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
f311fr1,
The Maximus Prop can be had in a 15 5/8 diameter.
I'm hoping Santa brings a pair this year since I didn't get them last year:-(.
I know they will work well with my Konrad conversion that Doller Offshore did on our boat two winters ago.
Hope this helps.
The Maximus Prop can be had in a 15 5/8 diameter.
I'm hoping Santa brings a pair this year since I didn't get them last year:-(.
I know they will work well with my Konrad conversion that Doller Offshore did on our boat two winters ago.
Hope this helps.
Last edited by NJSONIC; 12-12-2007 at 07:42 PM.
#50
Mindi
Thread Starter
Join Date: Jan 2005
Location: Hollywood, FL
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
steering wing plates and finished project
This boat started out with the propshaft 5.5" below the bottom of the boat. It is now 1.7" shorter, running 26 Hydromotive p5X's 74 MPH at 5400 RPM's.
The boat has great response getting on plane, and I will post the Stats with the Maximus as soon as we test. We estimate gaining another few MPH!
The boat has great response getting on plane, and I will post the Stats with the Maximus as soon as we test. We estimate gaining another few MPH!