Steering Wheel Hub???????
#1
Charter Member # 55
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Does anybody know who makes one of these types of steering wheel hubs with a Momo/Isotta bolt pattern?? The one I have is for a Dino bolt pattern. It has a 3/4 taper shaft with a keyway. I have looked around and can't find anything similar.
#4
Guest
Posts: n/a
#6
Registered
#7
Charter Member # 55
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I actually decided to improvise and cut the back outer edge off a an old momo hub that I had. It turned out pretty well, so I'm gonna leave it now. It would have cost me hundred bucks to get a new hub kit and the wheel was pricey enough.
Last edited by Griff; 01-08-2008 at 11:57 PM.
#8
Registered
![Default](/forums/images/icons/icon1.gif)
A real boater would have put this on that pretty new boat. ![Big Grin](/forums/images/smilies/biggrin.gif)
http://www.desertkarts.com/item80864.ctlg
Buck
![Big Grin](/forums/images/smilies/biggrin.gif)
http://www.desertkarts.com/item80864.ctlg
Buck
#9
Charter Member # 55
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
A real boater would have put this on that pretty new boat. ![Big Grin](/forums/images/smilies/biggrin.gif)
http://www.desertkarts.com/item80864.ctlg
Buck
![Big Grin](/forums/images/smilies/biggrin.gif)
http://www.desertkarts.com/item80864.ctlg
Buck
This ain't no beak boat
![Big Grin](/forums/images/smilies/biggrin.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
A real boater named buck183 needs to go boat shopping
![Stick Out Tongue](/forums/images/smilies/tongue.gif)
#10
Registered
![Default](/forums/images/icons/icon1.gif)
We modified the hub to fit the red Isotta one we put on Red Cloud too.