Arneson ASD6 to ASD7 conversion
#11
Those ASD's look awsome hanging off the back esp. on the boxes...
Eddie , I sent you an Email last night take a look when you get a chance.. Thanks , Scott
Eddie , I sent you an Email last night take a look when you get a chance.. Thanks , Scott
Last edited by littledcsrodshop; 02-22-2008 at 12:16 PM.
#12
Registered
Thread Starter
You'll never know unless you get building one with the same power[/QUOTE]
All you have to do is write a check?
You never know what Eric may do. He is supposed to go to Hustler and drive one. He was waiting for the Miami show to end and everything to settle down. He is supposed to go soon. If he likes it, who knows, he may buy one. If he does, I think he may take the motors out of the 388 and put them in the new one. Time will tell. If he gets a wild hair, who knows what he may do.
Eddie
#13
Registered
Thread Starter
#16
Registered
Thread Starter
The boat has no problem getting on plane. We leave the drives neutral and give it just a little tab and it hops right up. We don't do a lot of triming of the drives, like a bravo. They stay pretty much at neutral trim all the time.
The boat has a 1.3 gear ratio.
Eddie
The boat has a 1.3 gear ratio.
Eddie