Aluminum Cylinder Heads & Salt Water
#1
Registered
Thread Starter
Aluminum Cylinder Heads & Salt Water
Is anybody using aluminum cylinder heads in salt water and if so are they holding up ? What manufacture are you using ? I am looking to replace heads on hp500 carb motors, I'm looking at Dart pro1 310's or AFR 305 or 315cnc.
Thanks
Joby
Thanks
Joby
#2
Registered
VIP Member
Im running Dart have run brodex both having no problems.
Tha t said I try to flush after every trip.I have heard canfield dont hold up as well.I have run aluminum for over 15 yrs and would never go back to steel.
Tha t said I try to flush after every trip.I have heard canfield dont hold up as well.I have run aluminum for over 15 yrs and would never go back to steel.
#3
Registered
Thread Starter
#5
Registered
Thread Starter
#6
I hate the winter!!
Platinum Member
Join Date: Jul 2001
Location: long island, new york
Posts: 2,707
Likes: 0
Received 0 Likes
on
0 Posts
#7
OSO Moderator
Charter Member
Joey Griffin put aluminum head on Jon B's motors. So far so good!
As long as you flush it religiously you'll be fine.
As long as you flush it religiously you'll be fine.
__________________
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
The following users liked this post:
Dilligaf3268 (07-01-2023)
#10
The Illustrious One
Charter Member
Join Date: Oct 2000
Location: Internationally Famous
Posts: 3,277
Likes: 0
Received 3 Likes
on
3 Posts
Dart are very good just make sure you flush the salt out of the engines very thoroughly and use a product called salt away and when the foam bubbles come out of the tail pipes shut the motors down
__________________
Dying,....Is the day worth living for!!!!!!
Dying,....Is the day worth living for!!!!!!