Docking alone
03-07-2008, 02:38 PM
#41
Registered
Join Date: Dec 2006
Location: Tucson, AZ
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
In the Mercedes boat I have crash boxes. Normally what I do is crash into the dock run to the bow as fast as i can before I bounce off and jump on the dock. Then I tie it up and call my paint guy. If you ever wondered why they call them crash boxes, just watch my docking technique on that boat and you will understand!
I hate my fricken blower motors when we dock....
03-07-2008, 02:41 PM
#42
Platinum Member
Platinum Member
In the Mercedes boat I have crash boxes. Normally what I do is crash into the dock run to the bow as fast as i can before I bounce off and jump on the dock. Then I tie it up and call my paint guy. If you ever wondered why they call them crash boxes, just watch my docking technique on that boat and you will understand!
03-07-2008, 10:12 PM
#43
Registered
Join Date: Aug 2004
Location: Kentucky
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Backing into a slip or dock is only the thing to do if the water depth is known.
You can bury some expensive props, impellers, out drives, clog your blocks, fill up the strainer, and run aground in reverse. Backing in is an option, if you can dock bow to and still exit the boat do it, usually the props will be in the deeper water that way.
JMHO
You can bury some expensive props, impellers, out drives, clog your blocks, fill up the strainer, and run aground in reverse. Backing in is an option, if you can dock bow to and still exit the boat do it, usually the props will be in the deeper water that way.
JMHO
03-07-2008, 10:24 PM
#44
Registered
Join Date: Dec 2005
Location: Lanexa VA/St. Pete FL
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
If any part of the motor has "racing" on it just be prepared for the motors to cut off & run like **** any time you get near a dock. They especially like to do this if there is a crowd of people on the dock & they are all watching you.
03-08-2008, 03:43 AM
#45
Registered
Thread Starter
Join Date: Feb 2008
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Backing into a slip or dock is only the thing to do if the water depth is known.
You can bury some expensive props, impellers, out drives, clog your blocks, fill up the strainer, and run aground in reverse. Backing in is an option, if you can dock bow to and still exit the boat do it, usually the props will be in the deeper water that way.
JMHO
You can bury some expensive props, impellers, out drives, clog your blocks, fill up the strainer, and run aground in reverse. Backing in is an option, if you can dock bow to and still exit the boat do it, usually the props will be in the deeper water that way.
JMHO
03-08-2008, 11:17 PM
#46
Registered
Join Date: Jun 2002
Location: New Jersey
Posts: 2,098
Likes: 0
Received 0 Likes
on
0 Posts
Even when I have people on board I prefer they just sit there and stay out of my way. I would rather do it all myself then to explain to some how to do it my way.
Same with launching, I won't let anyone help me.
I find that I have to throw less people overboard this way
Same with launching, I won't let anyone help me.
I find that I have to throw less people overboard this way
03-09-2008, 06:50 AM
#47
Platinum Member
Platinum Member
And like B4M says setup your lines before you get there.
Why go alone??? You don't have to wait or talk to anyone and there's plenty of beer.
03-09-2008, 09:16 AM
#48
Rule #1: Never approach a dock faster that you can afford to hit it.
Rule #2: Fenders at least 1 inch in diameter for every 4 feet of boat length. (Yes - I have 10" diameter fenders.)
Rule #3: L-O-N-G docklines; at least 90% of the length of your boat. ...and a good throwing arm.
Rule #4: See Rule #1. Neutral is your best friend.
Rule #2: Fenders at least 1 inch in diameter for every 4 feet of boat length. (Yes - I have 10" diameter fenders.)
Rule #3: L-O-N-G docklines; at least 90% of the length of your boat. ...and a good throwing arm.
Rule #4: See Rule #1. Neutral is your best friend.
03-09-2008, 09:33 AM
#49
Registered
Thread Starter
Join Date: Feb 2008
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
You have very good arguments.That is boating without stress.You can renew your and your neighbours boats as often as you want.And you can be sure,that they talk to you anyway and maybe they want to use your lines too.
Last edited by Fortius; 03-09-2008 at 09:36 AM.
03-09-2008, 01:52 PM
#50
Registered
Join Date: Jan 2003
Location: Stafford Va.
Posts: 2,806
Likes: 0
Received 0 Likes
on
0 Posts
I have done it a bunch on my 42 Sonic and my 50 Nortech, during the day at a busy dock can be a a little tricky but most of the time somebody wants to see the boat so they get roped( lined) into helping. Most of the time it's at night when it's calm and nobody is there. I put 3 fenders out put 2 lines on work it in slow till I am about 2 feet away shut down and jump for the dock with both lines in my hand, been doing it for 8 years in a 40 plus foot boat and no problems yet.
Some of the places we have around here are not big boat friendly they were all built for the 22 foot bow rider and I have had to count the dock boards as a way of measure to see if I would fit.
Some of the places we have around here are not big boat friendly they were all built for the 22 foot bow rider and I have had to count the dock boards as a way of measure to see if I would fit.
