What to do when stepping on a sun lounge???
#13
Registered
Join Date: Dec 2000
Location: Bell Canyon, CA
Posts: 12,754
Likes: 0
Received 0 Likes
on
0 Posts
I don't step on mine if I can keep from it. It pulls the stitching & just isn't good for the material.
If we stop somewhere where we'll be tied up in a way that makes people have to travel from boat to boat, I put my hatch up to keep people off of it.
Use the swim platform to walk on, crawl on the hatch. You don't walk on the furniture in your house, why do it on your boat.
If we stop somewhere where we'll be tied up in a way that makes people have to travel from boat to boat, I put my hatch up to keep people off of it.
Use the swim platform to walk on, crawl on the hatch. You don't walk on the furniture in your house, why do it on your boat.
Seriously? Are you trying to make it last forever or what? Why not just enjoy it!!!!! Isn't that why you got the boat in the first place?
#14
Registered
Join Date: Jan 2004
Location: Saint Petersburg Fl
Posts: 1,571
Likes: 0
Received 0 Likes
on
0 Posts
I do a ton of wake-boarding and have a full sun pad so I have people walking on it all day. as you would expect the sun pad takes a beating, last time I had it recovered I was able to remove one seam and had everything double stitched. Seams are stress risers and typically were it fails. I will have to check in to the towel with suction cups deal, that sounds pretty good. Since the boat moves a simple towel will not work for my application, unlike an at anchor solution. Also as FYI, the more dense foam is easier on vinyl because it does not allow as much stress to be put on threads and vinyl etc if you can tolerate the less cushy feel.
Last edited by happy hours; 04-21-2008 at 05:07 PM.
#15
Registered
I don't step on mine if I can keep from it. It pulls the stitching & just isn't good for the material.
If we stop somewhere where we'll be tied up in a way that makes people have to travel from boat to boat, I put my hatch up to keep people off of it.
Use the swim platform to walk on, crawl on the hatch. You don't walk on the furniture in your house, why do it on your boat.
If we stop somewhere where we'll be tied up in a way that makes people have to travel from boat to boat, I put my hatch up to keep people off of it.
Use the swim platform to walk on, crawl on the hatch. You don't walk on the furniture in your house, why do it on your boat.
Jason, its a good thing you had your back to all these people walking on the hatch!!
#16
Registered
Thread Starter
Great ideas, thanks folks!
I like the yoga matt and the towel w/suction cups idea.
Couple of points on my useage.
It will be used and abused. When you and your guests are in and out of the boat all day it's tough to make them take their shoes off every time.
We live on our boat for the weekend too. It's not just a day boat. So that means the dock ('s), beach, rafting etc, etc.
Also in my boat even with the old interior you need some long ass legs to step to the floor instead of the bench seat.
With the lounge I'm building for it your not going to have a choice.
Was already planning on very dense foam for same reason listed above.
The vinyl makes a huge difference too.
When I had my old Sonic re-covered I Fk'd up by listening to the guy doing it.He sold me on a heavier material (it was) but that had no sheen to it compared to original.
If you spilled anything on it (was white too), it was there forever!
Soaked right in and I spent the rest of the time I owned that boat fighting it.
The 15 yr old vinyl that came out was all brittle and cracking but didn't have a single stain on it.
Gary
Couple of points on my useage.
It will be used and abused. When you and your guests are in and out of the boat all day it's tough to make them take their shoes off every time.
We live on our boat for the weekend too. It's not just a day boat. So that means the dock ('s), beach, rafting etc, etc.
Also in my boat even with the old interior you need some long ass legs to step to the floor instead of the bench seat.
With the lounge I'm building for it your not going to have a choice.
Was already planning on very dense foam for same reason listed above.
The vinyl makes a huge difference too.
When I had my old Sonic re-covered I Fk'd up by listening to the guy doing it.He sold me on a heavier material (it was) but that had no sheen to it compared to original.
If you spilled anything on it (was white too), it was there forever!
Soaked right in and I spent the rest of the time I owned that boat fighting it.
The 15 yr old vinyl that came out was all brittle and cracking but didn't have a single stain on it.
Gary
#17
Registered
:
http://www.youtube.com/watch?v=DxYabRqEIr8
Jason, its a good thing you had your back to all these people walking on the hatch!!
Jason, its a good thing you had your back to all these people walking on the hatch!!
#18
Registered
Join Date: Dec 2006
Location: san diego
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
This is some early pics of the Katwalkz this is without the suction cups and with out the halfnaked model on it yet. We are shooting those pics this week in Havasu. The Zoe Deck is like this only smaller with or with out the nonslip matting
#19
Platinum Member
Platinum Member
Join Date: Jun 2006
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
I have to agree. I think you should party on it, it makes a great dance floor, crash pad, etc. Along with your nice sun pad, put a great stereo in the boat, and then the gang really wants to get up and dance. Isn't that what the boat is all about anyway. If you wear it out partying on it, there could be no better life! Plus of everything on the boat, it probably is the easiest upholstery to repair.