The Unknown Fitting...
#1
Official OSO boat whore
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
The Unknown Fitting...
I have a teague marine stainless crossover with a 3/8" mpt bypass fitting. I also have a stainless marine thermostat housing with a built in bung for a 3/4" hose. The problem is that I can't find a barb fitting for a 3/4" hose to 3/8" mpt fitting. The closest that I've gotten is through McMaster-Carr. They had a 3/8"mpt to 5/8" hose, and only in a pack of ten! Does anybody have a source that I could try, or is anybody capable of making the fitting? Thanks in advance!
#3
Official OSO boat whore
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Yes, I do not want to use a reducer. What does your catalog list?
#4
Charter Member #232
Charter Member
Cord if you are really in a jam let me know I have a machinist next door that makes me lots of parts and he can no doubt put together one for you.
Jon
Jon