Dreaded Milkshake
#21
Registered
![Default](/forums/images/icons/icon1.gif)
Make that 6,500 - 7,500 for this one. If I was starting with a raw block I would definitely scrap it and find a new one. This block has close to 30 hours worth of machine work. I have to at least attempt a repair. I should have it back out on the water today and I will let everyone know how it goes.
BTW, I pressure tested the repair up to 40 PSI after it was complete and found that the crack extended further than it actually appeared. I went ahead and extended the repair until it was out of sight. Hopefully I got to the end of the stress riser... We will see how it holds up.
BTW, I pressure tested the repair up to 40 PSI after it was complete and found that the crack extended further than it actually appeared. I went ahead and extended the repair until it was out of sight. Hopefully I got to the end of the stress riser... We will see how it holds up.
#22
Registered
Thread Starter
Join Date: Apr 2008
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I have had the boat out twice already, running it hard,and there are no signs of the milkshake. I think I have fixed the problem. The repair looks like Frankenblock but is holding up nicely.
I have some beautiful pictures of the repair in progress but my computer doesn't seem to recognize the 4GB SD card. I thgink I need a special card reader for that size SD card. I will post pics as soon as I buy a reader or find the camera's cable.
I have some beautiful pictures of the repair in progress but my computer doesn't seem to recognize the 4GB SD card. I thgink I need a special card reader for that size SD card. I will post pics as soon as I buy a reader or find the camera's cable.