Tools
#3
The Illustrious One
Charter Member
Join Date: Oct 2000
Location: Internationally Famous
Posts: 3,277
Likes: 0
Received 3 Likes
on
3 Posts
The knid you actually need that work. Dont bring your billy bad ass Snap On stuff....That way when you drop it in the water it wont be such a terrible experience.
Sears baby Sears
Sears baby Sears
__________________
Dying,....Is the day worth living for!!!!!!
Dying,....Is the day worth living for!!!!!!
#4
Registered
Thread Starter
Join Date: May 2008
Location: Summerville, SC
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
#5
Registered
Since my daily tools are Snap On, thats what I have in the tool bag.. If it goes overboard because your junker broke and I'm bailing your broke down butt out of another jam, you either dive for it or pay for the replacement
Basics in the tool bag: Sockets, wrenches up to 7/8, screwderdoers,test light, spare ign switch.. Leatherman is always on my belt, fixes 97% of the problems we run into it seems..
Basics in the tool bag: Sockets, wrenches up to 7/8, screwderdoers,test light, spare ign switch.. Leatherman is always on my belt, fixes 97% of the problems we run into it seems..
#6
Registered User
Wrench set- 1/4 to 7/8, sockets, 3/8 drive, same sizes. Screwdrivers, pliers, vice grips, Volt/ohm meter. Crimping pliers. Butane torch. Magnet, inspection mirror. Just as important are the parts- filters, plugs, belts, impellers, tape, sandpaper, wire & crimp-ends, shrink tube. I even have a couple rocker arms and springs. Handful of common fasteners. All in a waterproof Pelican box. I always bring duplicates of the most common things- I have a habit of dropping things in the bilge and overboard. I've sent enough 1/2 and 9/16 wrenches overboard to stock a Sears hardware department.
and...
DUCT TAPE and TIE WRAPS!!
and...
DUCT TAPE and TIE WRAPS!!
#7
The Illustrious One
Charter Member
Join Date: Oct 2000
Location: Internationally Famous
Posts: 3,277
Likes: 0
Received 3 Likes
on
3 Posts
Pretty much after I swam for a $100 wrench one day I figured Sears is it pal.... F*** the dumb sh**
do yourself a favor and throw a 5/16 nut driver in your tool bag as well along with a 5/16 allen wrench....
do yourself a favor and throw a 5/16 nut driver in your tool bag as well along with a 5/16 allen wrench....
__________________
Dying,....Is the day worth living for!!!!!!
Dying,....Is the day worth living for!!!!!!