Looking For A Mini Hawk,,,,,,,,,
#1
Registered
Thread Starter
Join Date: Feb 2005
Location: long island, newyork
Posts: 2,551
Likes: 0
Received 2 Likes
on
2 Posts
Looking For A Mini Hawk,,,,,,,,,
Hoping To See If Theres A Mini Hawk Around, Or Maybe If A Fellow Member Has One. Structurally Sound Is All Thats Needed. Cosmetics Are No Issue.
#3
VIP Member
VIP Member
paul lasossa has one too....
#5
Registered
Thread Starter
Join Date: Feb 2005
Location: long island, newyork
Posts: 2,551
Likes: 0
Received 2 Likes
on
2 Posts
if u can send them an e mail or pm for me so i can try to pick one up.
i m looking to get one so i can put a sea doo rxp 255 hp engine with a straight shaft ind rudder steering in it.
hopefully this years winter project.
i m looking to get one so i can put a sea doo rxp 255 hp engine with a straight shaft ind rudder steering in it.
hopefully this years winter project.
#6
Registered
Join Date: Jan 2006
Location: Syracuse N.Y.
Posts: 4,951
Likes: 0
Received 0 Likes
on
0 Posts
That would be interesting to see Are you aware of the bounce factor they have? and getting them on plane wasn't the easest thing eather. Good Luck keep us posted.
#7
Registered
Thread Starter
Join Date: Feb 2005
Location: long island, newyork
Posts: 2,551
Likes: 0
Received 2 Likes
on
2 Posts
there was the original, then someone took the boat and cut a pad into it to remove the hop.
were in the middle of dialing in a mini cat with an outboard on it at present to get used to the scale for now.
were not going for top end as much as acceleration. i plan on skying this thing out side the inlet over here.
#9
VIP Member
VIP Member
bo, call adnny at swipes, he is the "hotdog" guy...i'm sure he will sell you a hull, amybe even be able to help with some specifics.
#10
Banned
Join Date: Aug 2007
Location: Guntersville. Alabama
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts