Gil Risers needed..
#1
Registered
Thread Starter
Join Date: Jan 2005
Location: Neither here, nor there
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Gil Risers needed..
I have two sets of tall Gil Risers that won't fit under my hatch, to that end, I'm looking to sell or trade the tall Risers for 2 pairs of short Risers.
The measurement from bottom of the Riser flange to the top of the Riser is appx. 9 1/2 inches. (the short Riser is 3 inches shorter.)
(Alternatively, I need to know if another brand of riser will bolt on the manifold.)
All advice is appreciated!
The measurement from bottom of the Riser flange to the top of the Riser is appx. 9 1/2 inches. (the short Riser is 3 inches shorter.)
(Alternatively, I need to know if another brand of riser will bolt on the manifold.)
All advice is appreciated!
#3
Team Dysfunctional
Charter Member
Join Date: Jan 2001
Location: Bolton Landing NY
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
I have a one set of gill short on the manifold side, standard height on the transom for a bravo available. I'm located in NY
__________________
If it aint broke .... I can break it....
If it aint broke .... I can break it....
#10
Registered
Thread Starter
Join Date: Jan 2005
Location: Neither here, nor there
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the input.
In the short term, I plan to sell the Gil risers and 2 pair of Stellings take-offs that are collecting dust.
In the short term, I plan to sell the Gil risers and 2 pair of Stellings take-offs that are collecting dust.
Last edited by bpp944; 08-24-2008 at 05:59 AM.