Looking for new blowers, any opinions?
#21
Banned
Join Date: Jul 2008
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
People have been trying gor 30 years to make them work in offshore applications and the "lag" when throttling the boat makes it impossible to run in rough water. I know they are trying to perfect them but I haven't seen any boats with them. Last year I was ready to write a check for a set until an unrelated incident happened with the person that built them and it completley turned me off.
#22
Registered
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
Posts: 1,436
Likes: 0
Received 4 Likes
on
4 Posts
![Default](/forums/images/icons/icon1.gif)
What about something like this? Low profile and Tomcat tested it at Sterling at something like 1800 hp. http://www.rtechperformance.com/biggun.html
Dustin
#25
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
We run an honest 14 to 16lbs of boost on 93 pump gas and methanol injection with our 565 CI ,1471 high helix blowers ,hydraulic rollers, spin 6500rpms every time out and only need 30 degrees of lead to attain well over 1400hp on pump gas with this set up.
We now have 200+ hrs and currently leek down at 9% cold.
We haven't tested it yet but I would think that the new Whipple spun to the moon on meth would be lethal as hell.
Just be sure to have a few spare #6 drives in stock.
Good Luck with your project!
Glen Iceinjectionsystems.com
We now have 200+ hrs and currently leek down at 9% cold.
We haven't tested it yet but I would think that the new Whipple spun to the moon on meth would be lethal as hell.
Just be sure to have a few spare #6 drives in stock.
Good Luck with your project!
Glen Iceinjectionsystems.com
#26
Banned
![Default](/forums/images/icons/icon1.gif)
We run an honest 14 to 16lbs of boost on 93 pump gas and methanol injection with our 565 CI ,1471 high helix blowers ,hydraulic rollers, spin 6500rpms every time out and only need 30 degrees of lead to attain well over 1400hp on pump gas with this set up.
We now have 200+ hrs and currently leek down at 9% cold.
We haven't tested it yet but I would think that the new Whipple spun to the moon on meth would be lethal as hell.
Just be sure to have a few spare #6 drives in stock.
Good Luck with your project!
Glen Iceinjectionsystems.com
We now have 200+ hrs and currently leek down at 9% cold.
We haven't tested it yet but I would think that the new Whipple spun to the moon on meth would be lethal as hell.
Just be sure to have a few spare #6 drives in stock.
Good Luck with your project!
Glen Iceinjectionsystems.com
![EEK!](/forums/images/smilies/eek.gif)
Glen your a funny funny guy , more B@@ST
![Ernaehrung004](/forums/images/smilies/ernaehrung004.gif)
![Ernaehrung004](/forums/images/smilies/ernaehrung004.gif)
#27
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Its stating to get old we just blew our Starboard drysump 6 on Tuesday.
We are pulling it later today, thats 5 drives in two seasons.
The down side to our sick acceleration rush!
#28
Banned
![Default](/forums/images/icons/icon1.gif)
![Cool](/forums/images/smilies/cool.gif)
I do believe i will be able to pass that #
![Ernaehrung004](/forums/images/smilies/ernaehrung004.gif)
I'll call rudy and give him some chit
Gino sorry for the hijack BIG Daddy
#29
Registered
Join Date: Jul 2008
Location: lake charles LA
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
We Run Whipple R980's Which Are A Big Screw Blower Built For Alcohol Drag Cars. We Picked Up Over 200 Hp Over A Conventional 1471. Plenty Boost And No Heat. Look In The Picture Section At The White 40 Ft Motion Or Ask Goldman How Howard's Boat Runs With Them
Down Side They Are Bigger Than A Psi
Up Side You Can Pick Them Up For Around 4500 Each
Down Side They Are Bigger Than A Psi
Up Side You Can Pick Them Up For Around 4500 Each
#30
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
here ya go Gino...1750 plus
![](http://i305.photobucket.com/albums/nn227/offshoredrillin/cig%20stuff/byrdpic.jpg)