1995 mercury 2.5 offshore
#1
Registered
Thread Starter
Join Date: Mar 2002
Location: Sand Springs/Grand Lake oklahoma
Posts: 975
Received 0 Likes
on
0 Posts
1995 mercury 2.5 offshore
I need so help. All of a suden my ignition and my trim quit working. I checked the one fuse that my manual shows and there is no loose wires. Is there more fuses than just the one. I am new to the outboard scene. Has anyone ever had a problem simalar to this. Thanks
#2
Registered
Join Date: Mar 2001
Location: St.Cloud , Florida Osceola County
Posts: 879
Likes: 0
Received 0 Likes
on
0 Posts
First thing is get yourself a meter and make sure your getting 12 volts, I had the same problem on my trim pump, good luck
If you got a 2.5 your trim pump is in your boat check voltage at the trim pump also.
If you got a 2.5 your trim pump is in your boat check voltage at the trim pump also.
Last edited by skatermike24; 03-12-2002 at 08:37 AM.
Thread
Thread Starter
Forum
Replies
Last Post
p4-33
General Racing Discussion
1
06-18-2003 12:58 PM
DaveP
General Boating Discussion
0
01-24-2002 12:38 AM