496 HO mods....best bang for the buck.
#73
A 525 in a 22C???
Invest in a helmet and hydraulic steering!!!
I would be curious what that boat would do with that motor and your X up a couple of inches. Probably would think about K-planes as well.
Let us know how your time travel experiment goes and if that still isn't fast enough, I can direct you to someone who can get another 40hp/70lb torque out of that motor without screwing it up.
Invest in a helmet and hydraulic steering!!!
I would be curious what that boat would do with that motor and your X up a couple of inches. Probably would think about K-planes as well.
Let us know how your time travel experiment goes and if that still isn't fast enough, I can direct you to someone who can get another 40hp/70lb torque out of that motor without screwing it up.
#74
Registered
Join Date: Jan 2004
Location: San Diego, California
Posts: 2,777
Likes: 0
Received 6 Likes
on
6 Posts
You are welcome! As Unsane says, be safe and equip your 22 footer for the speeds of more power!
When you can buy a complete low hour HP525 for under $20K, thats a smok'in good deal and you will be happy with the power and reliability of the HP525. Now just sell your 496 for some decent dollars and the next owner can afford to upgrade to 525HP with our Raylar kit. Everyone wins!
Best Regards,
Ray @ Raylar
When you can buy a complete low hour HP525 for under $20K, thats a smok'in good deal and you will be happy with the power and reliability of the HP525. Now just sell your 496 for some decent dollars and the next owner can afford to upgrade to 525HP with our Raylar kit. Everyone wins!
Best Regards,
Ray @ Raylar
#75
Registered
A 525 in a 22C???
Invest in a helmet and hydraulic steering!!!
I would be curious what that boat would do with that motor and your X up a couple of inches. Probably would think about K-planes as well.
Let us know how your time travel experiment goes and if that still isn't fast enough, I can direct you to someone who can get another 40hp/70lb torque out of that motor without screwing it up.
Invest in a helmet and hydraulic steering!!!
I would be curious what that boat would do with that motor and your X up a couple of inches. Probably would think about K-planes as well.
Let us know how your time travel experiment goes and if that still isn't fast enough, I can direct you to someone who can get another 40hp/70lb torque out of that motor without screwing it up.
#76
Offshoreonly Advertiser
Offshoreonly Advertiser
496 Best Answer!
Ok you guys... Sorry we have been away for awhile but this is your solution!! Headers! Completely bolt on! Does not void factory warranty! Do not need or recommend any computer upgrades! But, uou may also need a new prop for that performance - so check this out!! Give us a call
TEAGUE CUSTOM MARINE
661.295.7000
Shop or Browze 24/7 @ www.teaguecustommarine.com
TEAGUE CUSTOM MARINE
661.295.7000
Shop or Browze 24/7 @ www.teaguecustommarine.com
#79
Registered
Join Date: Apr 2005
Location: www.bajaboatowners.com
Posts: 2,957
Likes: 0
Received 1 Like
on
1 Post
Still waiting on the dyno results with stock exhaust vs CMI Etops....I remember the hype with the sport tubes that are at the tune of around 4500.00 a set. Pretty expensive stainless if you ask me...I'll be a player if these net any gains, but I'm with the rest 21hp is not worth 3k....Money better spent selling the 496's and investing in 525's that already come with CMI's