Standard Bravo 1 and HP 500 EFI
#1
Registered
Thread Starter
Join Date: Feb 2001
Location: Aliso Viejo, CA
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I just recently got a HP 500 EFI, and I have a standard Bravo 1 drive. Will I be ok with this setup. If I am not to hard on the throttle will I be ok, or will eventually the drive break? Thanks
#3
Registered
Join Date: Feb 2001
Location: Verona Beach, NY USA
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
We ran a stock Bravo in our F1 boat it stayed together, but we had to replace the gears after two events(1 race, and 1 poker run). You'll have to watch it if you start driving hard. Adding a drive shower and synthetic lube will help.
Check out www.driveshowers.com
Steve
Check out www.driveshowers.com
Steve
Thread
Thread Starter
Forum
Replies
Last Post
tcm07
General Boating Discussion
20
10-03-2008 02:00 PM