Anybody Make TRS upgrades for 750 hp. Plus ?
#1
Platinum Member
Platinum Member
Thread Starter
Anybody Make TRS upgrades for 750 hp. Plus ?
Does anybody know of anybody that makes upgraded shafts etc. for TRS drives?
Looking to put 572 tall desks to current drives.
750 hp. 750 torque.
Probably won't last long and will have to up grade to other drives.
But I thought I would see if anyone is or has successfully run big power to them.
Thanks for everybodys help
with other info as well.
You guys / gals are a great help.
Cougarman
Looking to put 572 tall desks to current drives.
750 hp. 750 torque.
Probably won't last long and will have to up grade to other drives.
But I thought I would see if anyone is or has successfully run big power to them.
Thanks for everybodys help
with other info as well.
You guys / gals are a great help.
Cougarman
#5
Platinum Member
Platinum Member
Cougar-Just a humble opinion: Obviously you want to go fast, but a TRS is not the way to go there. The unit is not designed for high speeds and by the time you get them strong enough to hold your power, you will have spent enough money to buy some used Speedmasters.
#9
Platinum Member
Platinum Member
Thread Starter
Trade In ?
NW_Jim,
You would have to plug the transome and reglass.
Layout you new cut outs and recut & rerig.
Something it would be nice to avoid, but part of going faster and replacing older equipment with the latest and greatest.
thanks
Cougarman
You would have to plug the transome and reglass.
Layout you new cut outs and recut & rerig.
Something it would be nice to avoid, but part of going faster and replacing older equipment with the latest and greatest.
thanks
Cougarman
Thread
Thread Starter
Forum
Replies
Last Post
THRILLSEEKER
General Boating Discussion
12
02-05-2009 05:05 PM
mavrick10
General Boating Discussion
58
09-21-2004 12:46 PM