Perko Sea Strainer
#21
Registered
Thread Starter
Join Date: Oct 2005
Location: Lake Norman, NC
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
#22
Registered
I'll email in the info to my vendor, see if they can help. Was a tad out of pocket today, saw your emails but could not respond. Hopefully I'll have some answers tomorrow..
#24
Registered
Thread Starter
Join Date: Oct 2005
Location: Lake Norman, NC
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
#27
Registered
Is there anything special about the posts that one couldn't just use stainless threaded rod?? You probably can purchase threaded rod by the foot from McMaster Carr.
#28
Registered
Well, so far I have been told the tie rods come as a set of four for the 400 series strainer, but are sold individually for the 500 series, yet the price is the same, and the 400 series come as a set only. And the BOTH use the same part number...
Not to mention the list on the set is 163 bucks?? When I pointed that out, they went back to the books to see if I could get a real answer..
Audio, I still have no idea which model yours is. I sent the other guys some breakdowns, maybe with that you can find yours??
Not to mention the list on the set is 163 bucks?? When I pointed that out, they went back to the books to see if I could get a real answer..
Audio, I still have no idea which model yours is. I sent the other guys some breakdowns, maybe with that you can find yours??