Raw Water Pump Kit???
#1
Registered
Thread Starter
Join Date: Sep 2001
Location: Nashville, TN
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Raw Water Pump Kit???
Does Mercruiser offer a kit for the raw water pump on a HP500 that includes the impeller, gaskets and wear plates in one package? If so, does anybody know the part number?
#2
Forum Regulator
VIP Member
Yes, they do have this kit, but I do not know the part number. Goodfella should chime in on this soon.
#4
Registered
Thread Starter
Join Date: Sep 2001
Location: Nashville, TN
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Thanks!
Codd - I have 1995 Gen V motors. Will this kit work with my pumps or do I need to order a different kit since mine is of an older design?
Codd - I have 1995 Gen V motors. Will this kit work with my pumps or do I need to order a different kit since mine is of an older design?
Last edited by jbrauer; 05-06-2002 at 01:50 PM.
#7
Registered
Join Date: Oct 2000
Posts: 1,238
Likes: 0
Received 0 Likes
on
0 Posts
Just some $.02 worth.......a friend just replaced 1 of the engines impeller. What was unusal about it was that is blue in color. He said that this type will run about 7-10 minutes with out water...where a the black OEM style only runs a 2-3 minutes without water....Just passing it along
#9
Registered
Join Date: Oct 2000
Posts: 1,238
Likes: 0
Received 0 Likes
on
0 Posts
I just talked to him on the phone and he said he has the part number ...but it is in the boat. But he thinks he got it from BAM marine and it is made from silcone. I will repost with aprt number or you can call BAM marine or even e-mail them