If you can't find it....Make it. DIY fuel injection
#11
Registered
Thread Starter
Actually, it's all self taught. I do a lot of reading and even more listening. Then I go out and try it a few dozen times and post the pics of the 87th try when I finally got it right.
No doubt about that. I made the first one over 5 years ago. I haven't made one in a while, so I figured I would poke around on the internet and see if there was something similar out there. Still nothing, so back to to making it myself. It's not easy, but you sure do get a great sense of satisfaction when it's all done and working.
Thanks everyone. I really appreciate it.
Eddie
No doubt about that. I made the first one over 5 years ago. I haven't made one in a while, so I figured I would poke around on the internet and see if there was something similar out there. Still nothing, so back to to making it myself. It's not easy, but you sure do get a great sense of satisfaction when it's all done and working.
Thanks everyone. I really appreciate it.
Eddie
#13
Registered
#14
Registered
Thread Starter
Thanks RT.
Here are a few shots of it all finished up with the exception of the hard coat anodizing. As soon as I finish the second one completely, I will send them both out for anodizing. Thanks
Eddie
Here are a few shots of it all finished up with the exception of the hard coat anodizing. As soon as I finish the second one completely, I will send them both out for anodizing. Thanks
Eddie
#16
Were doomed!
Charter Member
if you look at the middle pic above in post 14 you will see they follow the outline of the blower. Also you need a place to bolt the fuel rails down to as well...
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
#17
Registered
Thread Starter