Formula restorers - Used Original Style Gauges
#1
Registered
Thread Starter
Join Date: Apr 2001
Location: Annapolis MD
Posts: 1,464
Likes: 0
Received 0 Likes
on
0 Posts
Formula restorers - Used Original Style Gauges
Cleaning up the garage and found I still have the box of old gauges from the Formula. Are the original square bezel style except for the Gaffrig II tachs. Boat had twin panels, so there are two of most gauges, four of some. Whole thing is free to an OSO'er (but not going to piece them out), you just pay the shipping . Everything worked when I pulled it but no guarantees. They have been sitting on the shelf for about 2 years now and I need the space for parts for my '65 Corvette.
-Greg
-Greg
#3
Registered
Looks like the same time 302 was posting here, I was sending you an email.
Greg, driving back from LOTO yesterday, I played tag with a 65 convertable. What a car. Have fun with yours.
Greg, driving back from LOTO yesterday, I played tag with a 65 convertable. What a car. Have fun with yours.
#4
Registered
Thread Starter
Join Date: Apr 2001
Location: Annapolis MD
Posts: 1,464
Likes: 0
Received 0 Likes
on
0 Posts
I got Chart's e-mail first, so guess you get first dibs. I'll do an inventory of them and e-mail you. If you want to work out something to split some with 302Sr1 that's up to you all.
The tachs are 3 1/2 (?) inch Gaffrig's, not the original "square" Formula ones, although those may be in the old gauges box too.
I think there may be some Nordskog speedo's (2) in the box too, as I dumped those and just use my GPS readout now.
-Greg
PS - My '65 is "somewhat" not stock.
http://www.corvetteforum.net/classic...65corvette.htm
The tachs are 3 1/2 (?) inch Gaffrig's, not the original "square" Formula ones, although those may be in the old gauges box too.
I think there may be some Nordskog speedo's (2) in the box too, as I dumped those and just use my GPS readout now.
-Greg
PS - My '65 is "somewhat" not stock.
http://www.corvetteforum.net/classic...65corvette.htm
Last edited by GregP; 05-28-2002 at 11:12 AM.
Thread
Thread Starter
Forum
Replies
Last Post
DoubleTrouble4U
General Boating Discussion
6
04-22-2008 04:41 PM
Big Block Billy
Fiberglass and Paint
0
04-14-2006 01:42 PM