Bleeding power steering
#1
Guest
Posts: n/a
![Default](/forums/images/icons/icon1.gif)
Last fall I removed the motor and gimbal assy from my boat. I have put everything back together. I lost some power steering fluid in the process. I filled the resevoir and it seemed sucked quite a bit of that down which I immediately re-filled again. The problem is I still don't have any steering. It seems like it has air somewhere in the system. It is not external steering. It is the stock system, I believe it is Hynautic. I think that the cylinder itself needs to be bleed. Can anyone help?
#2
Registered
Join Date: Mar 2001
Location: St.Cloud , Florida Osceola County
Posts: 879
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Hynautic I think has a web site they should be able to fax you the bleedings process.
call the 1-800 http://www.marinecontrolsys.com/
call the 1-800 http://www.marinecontrolsys.com/
Last edited by skatermike24; 05-28-2002 at 02:08 PM.
#3
Registered
Join Date: Nov 2000
Location: Grand Haven, MI USA
Posts: 3,124
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
You should not need to bleed this system. You can crank the wheel back and forth and feel a jerky motion. Keep going back and forth until the jerking stops. This should do it. Check the level afterwords.
#4
Charter Member #1171
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Yep,,, Simple,,, DONZI Mitch has it !!
__________________
I want to live in a world where a chicken can cross the road and not have its motives questioned.
I want to live in a world where a chicken can cross the road and not have its motives questioned.
#6
Guest
Posts: n/a
![Default](/forums/images/icons/icon1.gif)
Mine does nothing. Turn the wheel either way and the ram just sits there. So I am thinking that the ram needs bleeding. There is a large bolt on top that serves no apperant purpose, so I am assuming that it is a bleeder of some sort. I left a message with marine control, hopefully they can fax a "procedure".