Need Propellers...
#1
Registered
Thread Starter
Need Propellers...
Looking for props for the boat...15 or 16 diameter with around a 26 inch pitch---right and left hand---3 or 4 blade cleavers for Bravo or TRS.
Also have 1 pair of 16 X 22(perfect) and 1 pair of 15.5 X 24(a little dinged up) 3 blade cleavers for sale
All fit Bravo and TRS drives
Also have 1 pair of 16 X 22(perfect) and 1 pair of 15.5 X 24(a little dinged up) 3 blade cleavers for sale
All fit Bravo and TRS drives
#2
GOT MERC?
Join Date: Aug 2001
Location: Boynton Beach FL
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
Sean,
Why in the world are you looking for old style CLEAVERS!? There
are so many better performing propellers out there? I might have what you are looking for upstairs in the archives
Why in the world are you looking for old style CLEAVERS!? There
are so many better performing propellers out there? I might have what you are looking for upstairs in the archives
#4
Registered
Thread Starter
On second thought...mebee I should be looking for a pair of 26 inch Bravo I propellers
Thanks Jay, I'll let you know when we're ready...prolly drop the new motors in this weekend hopefully test next weekend.
Oh, BTW, hwdwtmtw
Thanks Jay, I'll let you know when we're ready...prolly drop the new motors in this weekend hopefully test next weekend.
Oh, BTW, hwdwtmtw
#5
Official OSO boat whore
Charter Member
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Goodfella-you wouldn't by chance have anything in a 30-32" range would you?
#7
Official OSO boat whore
Charter Member
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Sorry bud, but I'm running a single. Of course all of this is based on the assumption that I'll finish the boat. Yea, what's the liklyhood of that happening.
#9
Official OSO boat whore
Charter Member
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Bravo 1 with through hull exhaust on a 26' tri hull cat. The drive is on a 12" adjustable extension box which will be spaced back and additional 1.5". This drive will be surfacing with the centerline being around 1" above the bottom. Final height to be determined.