Phillip/Shane You Guys around?
07-24-2002, 07:53 AM
#51
Guest
Posts: n/a
Ryan B
Ryan I have not had my boat on the scale yet. It is kevlar and foam. The interior is four sparco seats and a console but twin canopies do add some weight. I did want to talk to you about some graphics.My boat is all white with blue integior any ideas? Also I would like to hear more about that nose piece.
By the way Ryan how are you feeling?. You sure seem to have taken some lumps this year
Michael
By the way Ryan how are you feeling?. You sure seem to have taken some lumps this year
Michael
Last edited by mjuwalters; 07-24-2002 at 08:02 AM.
07-24-2002, 10:44 AM
#52
Racer
Racer
Health wise I am pretty much fine, my pride is alittle hurt though. Both boats actually ended up right side up wich is a good thing. Feel free to call me at my shop. 941-758-3303
07-24-2002, 12:44 PM
#53
Registered
Join Date: Nov 2000
Location: NJ
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
Mike,
Your speed is very good with 300.promaxes on a 30' motion, 109 is very fast. Our 28' Skater with the same engines ran 114-115 on the very best days, low on fuel and into the wind. 113 is more a real most day speed. The fact still is you are hitting the limiters with 34" props, yes the 30' motion is bigger then the Skater, and the motion weighs a little more, but if you raise the limiters to 6,400 I think this where they are ment to be, there might be still some speed left in the boat. Even 100 rpm might = 2 mph.
Philip
Your speed is very good with 300.promaxes on a 30' motion, 109 is very fast. Our 28' Skater with the same engines ran 114-115 on the very best days, low on fuel and into the wind. 113 is more a real most day speed. The fact still is you are hitting the limiters with 34" props, yes the 30' motion is bigger then the Skater, and the motion weighs a little more, but if you raise the limiters to 6,400 I think this where they are ment to be, there might be still some speed left in the boat. Even 100 rpm might = 2 mph.
Philip
