K-Plane Hoses?
#2
Charter Member #232
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
I got mine from NAPA. Get the Marine Cat. and they have TONS of them listed. They had them for me in a day.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#4
Charter Member #232
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Ya the odesy sucked now get that thing in the water it has been long enough!!!! Then sell it and buy Kurts LOL ![Big Grin](/forums/images/smilies/biggrin.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
Jon
![Big Grin](/forums/images/smilies/biggrin.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#6
![Default](/forums/images/icons/icon1.gif)
I just got a local hydraulic shop to make up a set for me. They had the 1/4 stainless braided hose with 12000 psi working pressure and the -4 inverted flare stainless ends. Since my pumps are mounted on the fire wall I needed 6' and 8' hoses. I think the final cost came to about $8 a foot including the ends. Took them about 20 minutes to make while I waited.
#7
Charter Member #232
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Mine is coming along slow but good. I hope to have the windows glassed in this weekend and have it all sanded and the go to prime next weekend. That way I will have the whole week to keep looking at it and find small misses and stuff. I am going to miss the 4th so you better get yours done so that we have more boats up there ![Big Grin](/forums/images/smilies/biggrin.gif)
I will be up for the whole week. Staying at Bayview Cabins again ![Big Grin](/forums/images/smilies/biggrin.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
Jon
![Big Grin](/forums/images/smilies/biggrin.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
![Big Grin](/forums/images/smilies/biggrin.gif)
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#8
Official OSO boat whore
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I used Russell fittings for my trim rams. I think the adapters were 7/16x24tpi and be sure to get them in the -4 size.
Thread
Thread Starter
Forum
Replies
Last Post
blue64drop
General Q & A
6
11-11-2002 11:46 AM