25 Foot & UNDER photos..post them up!
#625
Registered
Join Date: Jan 2011
Location: NH
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
#627
SORE MEMBER
Platinum Member
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like
on
1 Post
[ATTACH=CONFIG]551626[/ATTACH]
https://www.youtube.com/watch?v=r8QFtvRsQFY Couldn't edit my earlier post so...
https://www.youtube.com/watch?v=r8QFtvRsQFY Couldn't edit my earlier post so...
#628
Gold Member
Gold Member
Great thread! Spent some time (starting at page 1) reading, looked at every photo and found myself getting annoyed at all the image shack, photobucket type attachments. Many of the older ones are deleted and my internet takes forever to load them anyway!
Worthwhile paying the minimal subscription fee so you can upload easily, anytime. It also supports the website we like so much.
I've had a few boats that come close to fitting in here, the closest was a 26' Australian Scarab. Twin Yamaha 150's and topped 63 on a perfect day. Only got one lousy photo from 1986....
Keep the pics coming, they're terrific.
RR
Worthwhile paying the minimal subscription fee so you can upload easily, anytime. It also supports the website we like so much.
I've had a few boats that come close to fitting in here, the closest was a 26' Australian Scarab. Twin Yamaha 150's and topped 63 on a perfect day. Only got one lousy photo from 1986....
Keep the pics coming, they're terrific.
RR
#630
Registered
Its over at Boostpower getting finishing touches I'll get the hatch on it when it gets back from there.
Should be pretty scrappy.
Alexi's finishing the fuel system and tuning it on a prop dyno building brackets (lucky me because that means they will work) and helping to mount some accessories.
Gonna start with a 36 PB4
UD
Should be pretty scrappy.
Alexi's finishing the fuel system and tuning it on a prop dyno building brackets (lucky me because that means they will work) and helping to mount some accessories.
Gonna start with a 36 PB4
UD
Last edited by Uncle Dave; 07-10-2016 at 03:53 PM.