Say does anybody have...
#1
Official OSO boat whore
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Say does anybody have...
Does anybody have a extra 90 degree adapter fitting for a IMCO steering setup? I need one more to finish, and after having to pay for some parts that were missing in the kit, I really don't feel like ordering another part.
#2
Charter Member #232
Charter Member
Cord was it sapposed to be in the kit, or did the way you ran it just work out nicer with the added bend. Personally I would call them up and ask them to send you a new one. I would be suprised if they did not.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#3
Official OSO boat whore
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
I know that the kit didn't come with a special locknut. I was also missing the 6 screws that attach the steering wheel. For this they charged me $10. Actually cut me a break because the minimum purchase was $25.
But you're right, I'm needing one more than a normal installation would require.
Fred-at this time the only fitting that I need is the 90. I might need a hose end or two, but I'm going to wait to see how things shake out. I'll keep your offer in mind. Thanks!
But you're right, I'm needing one more than a normal installation would require.
Fred-at this time the only fitting that I need is the 90. I might need a hose end or two, but I'm going to wait to see how things shake out. I'll keep your offer in mind. Thanks!