How do I polish my lowre units & props?
#1
Guest
Posts: n/a
How do I polish my lower units & props?
My cool polished lower units and props are getting tarnished (is that the right term?). I have tried polishing by hand with Mothers, but that is extreme work – especially in this heat. What kind of machine buffer should I get and how do you do the props?
Last edited by Uncle Toys; 06-27-2002 at 04:14 PM.
#2
Charter Member #232
Charter Member
I wonder what is in the water that causes that? Is the water there real hard? I wonder if like a CLR or something like that would work. You could opt to loose maybe a little speed and wax them. Maybe a coat of Rainex or something like that. Never Dull would be my last suggestion for getting them clean and keeping them that way. Those lowers look SO nice.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#3
Charter Member #232
Charter Member
Oh and if all that faild your daughters can do it for you!!! Remember to tell that that is the price of driving dads toy
__________________
Put your best foot forward!
Put your best foot forward!
#4
Guest
Posts: n/a
Jon, don't you sleep? Little Princess helps all the time, she especially likes to detail the transom.
Yes, Havasu (and the river) water is well known for being hard. Really works over the props quickly.
What I really need is some kind of power tool. Somebody out there must polish props - don't they use some tool?
Yes, Havasu (and the river) water is well known for being hard. Really works over the props quickly.
What I really need is some kind of power tool. Somebody out there must polish props - don't they use some tool?
#5
On the props, I would start with ON-OFF hull cleaner and a brush to remove the mineral deposits. Then I would use a 6" air sander with a polishing pad to do the lowers and the wheels. Other than that it's nothing but elbow grease......sorry, that's all I know.
Robert
Robert
#6
Charter Member #232
Charter Member
Buffing wheel bro
I sleep but when it is 100 degrees and 30000000000% humidity then it is hard to. Fan is not working well. I should go down to the shop and fire up the AC down there
I sleep but when it is 100 degrees and 30000000000% humidity then it is hard to. Fan is not working well. I should go down to the shop and fire up the AC down there
__________________
Put your best foot forward!
Put your best foot forward!
#7
Platinum Member
Platinum Member
Join Date: Jun 2001
Location: Silverdale,Washington,USA
Posts: 602
Received 0 Likes
on
0 Posts
Havasu Water
U.Toys,
Every one says salt water is hard on your boat but when I come home it rinses off, after being at Havasu it takes a while but that stuff wears off in the salt water up here.
Soooo, trailer that thing up here and play in the salt with it and that stuff will just wear off.
Your boat will be even faster too!!!
See ya at the fall heatwave,
Caleb
Every one says salt water is hard on your boat but when I come home it rinses off, after being at Havasu it takes a while but that stuff wears off in the salt water up here.
Soooo, trailer that thing up here and play in the salt with it and that stuff will just wear off.
Your boat will be even faster too!!!
See ya at the fall heatwave,
Caleb
#9
Registered
Join Date: Oct 2000
Location: San Clemente, CA
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
#10
Charter Member
Charter Member
Muratic Acid will clean the deposits off the prop, and wash down with H2O, dry and spray WD-40 on them. Just be careful where you use the Muratic Acid, it will leave a Mark!
MD
MD