LED strip lighting
#32
Registered
Thread Starter
Join Date: Mar 2007
Location: Lake Dallas, TX
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
How did you get the strip adhere to the back of the grill, just the adhesive that's on the back of the strip or did you use anything else?
thanx
Last edited by bert4332; 05-11-2012 at 10:44 PM.
#34
Ginger or Mary Ann?
Charter Member
They are attached with the strip attached double sided tape. Guess I shoulda been more clear on install. They aren't attached to the grills, but to the inside of the speaker between the cone foam and the housing side. There is enough space to place lights there. The rubber flex part of the cones do not contact the lights at all. The ears of the grill need to be cut back a little to clear the lights. A dremel and a couple minutes worth of work. This is with my JL speakers. Other brands install may vary.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Last edited by US1 Fountain; 05-12-2012 at 11:33 PM.
#35
AKA "BAZOOKA JOE"
Platinum Member
optx marine is in west marine and the only 16ft spool with 3M marine grade double aidded tape, a lot of OEMs are using them. RGB 50/50 have been showing browning on the silicone from the heat of the LED stick with single color LEDs go to www.optxmarine.com check out there products they have some wild LEDs
#36
Registered
Join Date: Jan 2012
Location: Grand Rapids, MI
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
www.optxmarine.com check out there products they have some wild LEDs
#37
AKA "BAZOOKA JOE"
Platinum Member
You get what you pay for, 3M marine grade adheasive, resisters that areimbeded in the silicone not mounted on the bac covered over with the tape to hide the. (not saying all produts are like that) but at cheaper price point thats what you get.....we have not seen any other brand with 3M marine grade.
#38
I agree with "you get what you pay for", but the cheaper ones I use have the resistor mounted in the silicone, and are vertical so you can still wrap them and not interfere with the resistor.
I don't care what kind of tape it has, if there's gonna be any question about the mounting, I'll find an alternative method to mount them and not depend on the tape.
I don't care what kind of tape it has, if there's gonna be any question about the mounting, I'll find an alternative method to mount them and not depend on the tape.
#39
Registered
Join Date: Jan 2012
Location: Grand Rapids, MI
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
#40
Ginger or Mary Ann?
Charter Member
Per request by a couple, easier to just put them here. A little late, but none the less..
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Last edited by US1 Fountain; 05-21-2012 at 06:56 PM.