Filling trs for bravo
07-24-2012, 01:53 PM
#1
Registered
Thread Starter
Join Date: Apr 2011
Location: MAINE
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
Filling trs for bravo
Questions:
The transon is sound. I understand the step down layering, plug process, but glaswork is a mystory
1.-how far do i cut back from the trs hole(s) both int and ext. To have proper strength and clearence for the bravo i?
2. Do i use epoxy or cloth/resin between layer - if cloth what type.
3 can i use a pre-made glass panel to match ext glass thickness and blend the joint for paint or do i lay up multiple layers of glass/resin.
4. Where can i get a bravo i cut out template.
Thanks for any help.
The transon is sound. I understand the step down layering, plug process, but glaswork is a mystory
1.-how far do i cut back from the trs hole(s) both int and ext. To have proper strength and clearence for the bravo i?
2. Do i use epoxy or cloth/resin between layer - if cloth what type.
3 can i use a pre-made glass panel to match ext glass thickness and blend the joint for paint or do i lay up multiple layers of glass/resin.
4. Where can i get a bravo i cut out template.
Thanks for any help.
07-24-2012, 01:59 PM
#2
Neno the mind boggler
VIP Member
PM sent, got the message the other day but forgot to re was on my droid phone
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
07-24-2012, 05:56 PM
#3
Registered
Join Date: May 2006
Location: Tuckerton, NJ
Posts: 2,168
Likes: 0
Received 0 Likes
on
0 Posts
Questions:
The transon is sound. I understand the step down layering, plug process, but glaswork is a mystory
1.-how far do i cut back from the trs hole(s) both int and ext. To have proper strength and clearence for the bravo i?
2. Do i use epoxy or cloth/resin between layer - if cloth what type.
3 can i use a pre-made glass panel to match ext glass thickness and blend the joint for paint or do i lay up multiple layers of glass/resin.
4. Where can i get a bravo i cut out template.
Thanks for any help.
The transon is sound. I understand the step down layering, plug process, but glaswork is a mystory
1.-how far do i cut back from the trs hole(s) both int and ext. To have proper strength and clearence for the bravo i?
2. Do i use epoxy or cloth/resin between layer - if cloth what type.
3 can i use a pre-made glass panel to match ext glass thickness and blend the joint for paint or do i lay up multiple layers of glass/resin.
4. Where can i get a bravo i cut out template.
Thanks for any help.
Dont know if intersted buy i have a couple of plates we made to go from trs to bravo woithoout messing around with glass email me if intersted
[email protected]
